1#

Obviously,voice calls are one of the most basic needs of Smartphone users. If your iPhone speaker not working during calls,it will make you crazy. It may be caused by some hidden settings, or it may encounter software clash, liquid damaged, and hardware.



Although this article is written in the iPhone 6S, the following steps are also suitable for solving the problem that the speaker sounds does not work on the iPhone or iPad.


Way1: Settings Cause the iPhone 6S no Sound from Ear Speaker

1. Make sure the "mute" button is off

The iPhone has a hardware mute switch,which lets you quickly and easily turn the ringer off and put the iPhone into vibrate-only mode.

First make sure you haven't mute from the left side. If the button is below and you can see the orange line, you have muted the sound on your iPhone. Please don't forget to check the volume on the iPhone 6S. You can control the volume using the volume button located directly below the mute button.


2. Check if the headphones connected,causing no sound from iphone 6S speakers

If you plug the headset into your iPhone 6S, you won't hear any sound coming from the speaker, you need to remove the headset; in addition, if you have connected the Bluetooth headset wirelessly,you should disconnect the headset and turn off the Bluetooth.



3. Notification settings

If your iPhone 6s has no sound in the app,be sure to check the notification settings for specific apps. In this example,we are displaying the call settings, you can also check the settings of the message or notifications from other applications:


  • Go to "Settings", scroll down and "Notifications"
  • On the next screen, make sure you have allowed notifications from this app, you can also set the "sound" of this app



4. Check the "Do Not Disturb" mode

When the "Do Not Disturb" function is enabled, users will not be able to hear any sound on the iPhone 6s. All calls, iMessage alerts, and calls was not heard.

Method for Close:


  • Slide from the bottom of the iPhone 6S to open the "control center"
  • Click the "moon icon" to turnoff "Do Not Disturb"




Way2: Software Crash Causes iPhone 6S no sounds

Software conflict are also the cause of the iPhone 6s speakers not working, you can try to restart the iPhone or"restore" to fix it.

1. Restart iPhone 6s


  • Press and hold the iPhone home button and sleep button
  • Wait for the Apple logo to appear and release all buttons

2. Steps for iPhone 6s "Restore"


  • Back up iPhone in iTunes first
  • Start "Settings" and click "General"
  • Scroll down, click "Reset", then click on the second option "Erase All Content and Settings"
  • Finally restore backup from iTunes after reset

Way3: Sound and Speaker not Working with YouTube on iPhone 6S

Since YouTube is one of the most popular apps on the iPhone and iPad, you may encounter situations where iPhone 6s no sound on YouTube and video app. Here will tell you some ways to solve it.


If you have already done the above steps, it proves that it is not a problem with the iPhone 6s settings, and there is no sound in the YouTube app alone. At this point, we need to remove the YouTube app and reinstall it, which will get rid of any temporary failures that may occur. Also, before reinstalling the app, check the YouTube app's updates and settings in the app store to see if there are new iOS updates.


Way4: No Sound on iPhone 6s after Dropping in Water

If your iPhone 6s suffers from water, it is likely that your speaker no sounds on iPhone 6s and if it is not processed in time, the damage will become more and more serious.

The correct processing steps for iPhone water damaged:

Step 1: Turn off your iPhone immediately and remove the back case from the iPhone, as the water can still be trapped in the crack.

Step 2: Put the iPhone on a paper towel or a very dry towel, then remove the SIM card.

Step 3:Now is the most important part, you need to find some rice, the more the better. It is best to put the rice in a resealable bag and put the iPhone and rice together. Then you find a cool, dry place, like a cabinet or storage room, for more than 24 hours.

Step 4:If the above steps do not successfully rescue your problem, you can also try to use a hair dryer to further repair.First you need to turn off your iPhone, then turn on the hair dryer and hover it over the speaker area and the headphone jack. Keep the hair dryer at a considerable distance from the iPhone to avoid overheating. You can repeat this step a few times to make sure that any moisture is evaporated by the blower.


If the problem persists, it is likely that sound not working on iPhone 6 has failed.



Way5: Real Case for Hardware Fix no Sound When iPhone 6s Rings

If the problem is on the hardware, you usually need to seek professional help. However, if you are experienced with iPhone repair, this troubleshooting may help you save iPhone 6s speaker repair cost or buy the cheap and high-quality iPhone parts at reasonable price from GEMWON Global phone accessories wholesale.


1.This iPhone 6S sometimes has no speaker sound when it enters the water, other app and talking. Turn on the settings and select the ringtone.After playing it, it will be silent. The test label of the disassembled switch turns red, and there is a small leakage of 30 mA. Peel off the shielding paper and find that the water is near the small audio. The capacitor is exploded and removed directly. The installed test found that the fault still exists.



2. I found a little trace of water on the side of the small audio, removed the small audio, and directly replaced the new small audio. The installed test did not leak, but the speaker failure remained.


3. Replace all the capacitive components with corrosion marks near the small audio, and install the test again. It is found that this iPhone 6S speaker still does not work properly.



4. Remove the small audio again,carefully hit the ground resistance of all the feet and found no fault. Also,carefully check the peripheral components and there is no problem of corrosion disconnection. Replace the small audio again, the fault remains.


5. Enter the settings to select the ringtone and listen carefully to the sound. The sound starts to get bigger,slowly becomes smaller and then becomes silent, which indicates that the small audio boosts the bootstrap energy storage part.



Since the storage capacitor has just been replaced, the IC has been replaced and replaced, so the faulty component is locked to the boost inductor. Remove the small iron piece on the back, you can see that the inductance has been obviously burned out, the multimeter test is passed, the internal coil burned and cannot store energy, and the test was restarted and the problem was fixed.


To Sum Up:

You can refer to the tips provided above to fix the fault that no sound on iPhone 6s. There may be more situations not described in this article, like iPhone 6s no sound when recording, if there are more questions welcome in the article Leave a message below or contact us.




Related Articles:

If the microphones on your iPhone, iPad, and iPod touch aren't working


How to Fix iPhone 6 Not Turning on


How to Fix iPhone 7 Plus Camera not Working